ASTM C1240 Silica Fume in Cementitious Mixtures

ASTM C1240 Silica Fume in Cementitious Mixtures

ASTM C1240 Silica Fume in Cementitious Mixtures

ASTM Standards:

C109/C109M Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

C114 Test Methods for Chemical Analysis of Hydraulic Cement

C125 Terminology Relating to Concrete and Concrete Aggregates

C138 / C138M concrete density (unit weight), production and determination of gas content

C135 Test Method for True Specific Gravity of Refractory Materials by Water Immersion

C183 Practice for Sampling and the Amount of Testing of Hydraulic Cement

C185 Test Method for Air Content of Hydraulic Cement Mortar

C219 Terminology Relating to Hydraulic Cement

C260 Standard specification for concrete air entrainment premix

C311 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

C430 Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

C441 Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

C494/C494M Specification for Chemical Admixtures for Concrete

C604 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

C670 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

C618 Standard specification for coal fly ash and untreated or calcined natural volcanic ash used in concrete

C1005 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

C1012 Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

C1069 Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

C1157 Performance Specification for Hydraulic Cement

C1437 Test Method for Flow of Hydraulic Cement Mortar

C1240 Standard specification for microsilica powder in binder mixture

ASTM C1240 Silica Fume in Cementitious Mixtures

American ASTM C1240 Silica fume Industry standard:

SiO2: ≥85.0%
H2O: ≤3%
Igloss: ≤6.0%
Grain size (45um sieves): ≤10%

We, Superior Abrasives Co., Ltd, have been exporting silica fume for more fifteen years. We have become the largest silica fume producer of stable quality and lower price in China, with clients from Australia, North America, middle east and south east Asia. The annual export volume is over 100,000MT.microsilica factory

Currently we offer four grades of silica fume (micro silica) :
Densified and Undensified, SIO2:>85%, 92%, 94% and >96%.

Packing:
10kg / 20kg soluble paper bags x 84 on the pallets.
500kg / 950kg / 1000kg plastic woven bags x 2 on the pallets(with or without bottom output )
We can also produce according to your requirement.

We are pleased to send you free samples, if you are interested in that. If you have any need or any requirement, please contact us by E-mail sales@superior-abrasives.com

Table of Contents

Request a Free Quote